Sol Coast Construction is an accredited Illume dealer installer on the Sunshine Coast, and Illume-only: we install nothing else. Illume skylight alternatives bring daylight-style light to any room, installed with no roof cutting.
The look of a skylight, without cutting the roof
An Illume is a solar-powered skylight alternative. A compact solar panel sits on the roof and feeds a slim LED panel set flush in the ceiling, so the room reads as though it had a skylight overhead. The light rises with the sun, holds through the day and fades at dusk. Because the roof is never cut, there is nothing to leak, nothing to let the heat in, and no shaft for dust or insects to settle in.
That is why the rooms Sunshine Coast homeowners ask us about most are the ones a roof window can never reach: the hallway down the middle of the house, a ground-floor room with a bedroom above it, a walk-in robe, a pantry, a garage. Illume goes where the roof line, the beams and the plumbing would stop a traditional skylight.


Rooms we light across the Sunshine Coast
- Hallways and entries. One long panel, or two squares in a row, turns the darkest corridor in the house into its brightest.
- Kitchens. A rectangle over the bench or the island gives even, shadow-free light to work under, with no heat on the stone.
- Living and dining rooms. Three panels along a raked ceiling give the look of a run of roof windows.
- Bathrooms and ensuites. No window, no problem. Illume is a sealed unit with no heat and no condensation, so it suits wet areas.
- Bedrooms, walk-in robes and media rooms. With the optional dimming kit the panel can be switched off or turned down for a sleep-in or a movie.
- Garages and lower floors. A room with another room above it cannot take a skylight. It can take an Illume.

Download the Illume brochure

Why Sunshine Coast homeowners choose Illume
No roof cutting. A traditional skylight or roof window means an opening in the roof, a shaft through the ceiling space and flashing that has to hold for decades in coastal weather. Illume needs none of it. On a Colorbond roof the solar panel mounts high on the ridgeline with a single 13 mm cable hole, grommeted, siliconed and shielded by the panel itself. On a tiled roof the brackets slide under the tiles and the cable runs beneath them.
No heat, no leaks, no maintenance. The LED diffuser is low-powered and makes no heat, so the room stays cool in January. There is no glass to clean, no dome to yellow and no sealed tube for bugs and dust to collect in. Once it is in, it is done.
Any roof, any ceiling. Colorbond, tile, vaulted ceilings, exposed trusses and exposed rafters all take an Illume. Asbestos, fibreboard and cement-sheet ceilings take a surface-mount panel that sits about 10 mm proud of the ceiling on a metal backing tray.
Free solar power, no battery. Illume runs purely on its own solar panel. There is no battery, by design: lithium cells have no place in a hot Queensland roof cavity. Nothing to charge, nothing to replace, nothing on your power bill.

Up to nine panels on one collector. A single roof-mounted solar panel can feed up to nine Illumes, so a whole hallway, or a kitchen and dining run, can share one discreet collector on the north side of the roof, even when the rooms themselves face south.
Australian made. Illume is designed and made in Australia by Kimberley Products and carries a five-year manufacturer's warranty.
Illume sizes and shapes
Illume comes in round, square and rectangular panels, sized by the floor area they light rather than by the hole in the roof, because there is no hole. The smallest round panel lights about two square metres; the largest rectangle, about twenty.
- Round: 280 mm and 350 mm (plus a 180 mm round from Illume's retail range).
- Square: 300 mm, 400 mm, 500 mm, 600 mm and 700 mm.
- Rectangle: 300 × 600 mm, 400 × 600 mm, 600 × 900 mm, 300 × 1200 mm and 400 × 1200 mm.
Every panel, with Illume's own product code, is listed in the range table below.
We match the panel to the room at the site visit: a 400 mm square for a powder room, a 300 × 1200 mm rectangle down a hallway, a pair of 600 mm squares over a kitchen bench. The full range, with frame sizes and illumination areas, is on our products page, and our room-by-room sizing guide shows which panel suits a hallway, a kitchen, a bathroom or a bedroom.
The Illume PRO range we install, with Illume's codes
Every panel below is from Illume's PRO (trade) range, with Illume's own product code, illumination area and light output, taken from Illume's product page. A code ending in TA is the flush-mount panel that sits in the ceiling; the matching TAS code is the surface-mount version for asbestos, fibreboard and cement-sheet ceilings, which sits about 10 mm proud on a metal backing tray. Every PRO panel has a white frame and comes with a 10 m cable. We name the code on your quote, so you can check it against Illume's site.
Round Illume panels
| Panel | Illume code (flush / surface) | Lights | Output | Outer frame | Cut-out | Illume suggests |
|---|---|---|---|---|---|---|
| 280 mm | KIS1013TA (flush only) | about 7 m² | up to 2,030 lm | — | — | pantry, laundry, bathroom, entrance |
| 350 mm | KIS1014TA / KIS1014TAS | about 11 m² | up to 2,730 lm | 350 mm dia. | 330 mm dia. | study, dining room, bathroom |
The 280 mm round is also made in a lower-output version (KIS1013TLA, about 6 m²) and the 350 mm round in KIS1014TLA / KIS1014TLAS (about 10 m²); we quote the high-output panels above unless you ask. Illume's retail range, sold through hardware stores, adds a 180 mm round (KIS1010, about 2 m²) and a 270 mm round (KIS1012, about 6 m²) with a 9 m cable.
Square Illume panels
| Panel | Illume code (flush / surface) | Lights | Output | Outer frame | Cut-out | Illume suggests |
|---|---|---|---|---|---|---|
| 300 mm | KIS2010TA / KIS2010TAS | about 6 m² | up to 1,365 lm | 312 x 312 mm | 290 x 290 mm | pantry, laundry, bathroom, entrance |
| 400 mm | KIS2012TA / KIS2012TAS | about 9 m² | up to 1,845 lm | 412 x 412 mm | 390 x 390 mm | study, dining room, bathroom |
| 500 mm | KIS2014TA / KIS2014TAS | about 11 m² | up to 2,535 lm | 512 x 512 mm | 490 x 490 mm | kitchen, living, family room, open plan |
| 600 mm | KIS2016TA / KIS2016TAS | about 13 m² | up to 2,925 lm | 612 x 612 mm | 590 x 590 mm | kitchen, living, family room, open plan |
| 700 mm | KIS2017TA / KIS2017TAS | about 17 m² | up to 3,290 lm | 700 x 700 mm | 675 x 675 mm | kitchen, living, family room, open plan |
Rectangular Illume panels
| Panel | Illume code (flush / surface) | Lights | Output | Outer frame | Cut-out | Illume suggests |
|---|---|---|---|---|---|---|
| 300 x 600 mm | KIS3012TA / KIS3012TAS | about 10 m² | up to 1,950 lm | 312 x 612 mm | 290 x 590 mm | hallway, passage, kitchen |
| 400 x 600 mm | KIS3015TA / KIS3015TAS | about 11 m² | up to 2,535 lm | 412 x 612 mm | 390 x 590 mm | hallway, passage, kitchen |
| 600 x 900 mm | KIS3018TA / KIS3018TAS | about 20 m² | up to 4,290 lm | 612 x 912 mm | 590 x 890 mm | large living room, commercial |
| 300 x 1200 mm | KIS3014TA / KIS3014TAS | about 20 m² | up to 4,290 lm | 312 x 1212 mm | 290 x 1190 mm | kitchen (over bench), commercial |
| 400 x 1200 mm | KIS3020TA / KIS3020TAS | about 24 m² | up to 4,720 lm | 412 x 1212 mm | 390 x 1190 mm | large open space, hallway, kitchen, commercial |
Illume options and accessories
- Remote Dimmer Kit. Dim or switch the panel off from a 4-channel 2.4 GHz remote with a range of up to 30 m; no electrician needed. Code SKSWRFA suits the 280, 350, 300, 400 and 500 mm panels and the 300 × 600 and 400 × 600 mm rectangles; SKSWRFB suits the 600 and 700 mm squares and the 600 × 900, 300 × 1200 and 400 × 1200 mm rectangles. Each extra panel on the same remote needs its own receiver (SKSWRFRXA or SKSWRFRXB).
- AC Driver PRO. Connects the panel to mains power so it works as a light at night: solar by day, mains by night. Illume recommends a qualified electrician for the connection. The kit is sized to the panel: SKISAC0204 (280 mm, 300 mm, 400 mm, 300 × 600 mm), SKISAC0206 (350 mm, 500 mm, 400 × 600 mm), SKISAC0208 (600 mm), SKISAC0210 (700 mm, 600 × 900 mm, 300 × 1200 mm, 400 × 1200 mm).
- Isolation switch, SKSW01. A DC wall switch with a 6 m cable that keeps the panel off until you want it, where a dimmer kit would come back on at dawn: walk-in robes, bedrooms, hallways.
- Pro cable extender. 10 m or 20 m, for two-storey homes and long runs; PRO range only.
- Multi system. Up to nine Illume panels run from one roof-mounted solar panel through a distribution module, sized to the panels you choose.

How an Illume installation works
- Call or enquire. Tell us which rooms you want lit. From a photo we can usually say whether a roof window, a solar tube or an Illume is the right answer for that room, and we will tell you.
- Site visit and fixed written quote. We measure the rooms, check the roof and ceiling type, and confirm the panel sizes and where the solar panel will sit. The quote is fixed, with multi-panel pricing when you are lighting more than one room.
- Installation. Once you accept, your Illume kit is generally ready within ten business days and most homes are installed within two to six weeks of ordering. The work is clean and quick, done by a licensed carpenter, QBCC licensed and insured, with over 25 years on Sunshine Coast roofs.

Illume questions, answered
Does an Illume skylight work at night?
Short answer: Not by default, but an AC driver add-on lets it run from mains power after dark.
Detailed: A standard Illume runs from its solar panel: it comes on gradually at sunrise, holds full brightness through the day and fades as the sun sets. If you want the same panel as a light after dark, we fit Illume's AC Driver PRO (codes SKISAC0204 to SKISAC0210, sized to the panel) that connects it to your mains power, usually through an existing downlight's 413 socket, so it works from the same wall switch as your downlights. Illume recommends a qualified electrician for the mains connection. Pantries and hallways are the usual candidates.
Can I turn my Illume off or dim it?
Short answer: Yes, with the optional remote-control dimming kit.
Detailed: Out of the box an Illume is on whenever the sun is. Illume's Remote Dimmer Kit (SKSWRFA for the smaller panels, SKSWRFB for the 600 mm square and up) lets you dim it or switch it off entirely, which is why it is popular in media rooms and bedrooms. It resets each morning and comes back on with the sunrise. If you want a panel to stay off until you say so, the SKSW01 isolation switch is the answer.
Does an Illume give natural light?
Short answer: No. It gives daylight-style LED light that follows the sun, with no roof cutting.
Detailed: Illume is not a window to the sky. It is a solar-powered LED panel that tracks the light outside, so it brightens and fades with the day the way a skylight would. What you give up is a view of the clouds. What you gain is a skylight in rooms that could never have one, with no heat, no leaks and nothing to maintain. For the full list of trade-offs, read our honest Illume pros and cons guide.
Do Illume skylights work on cloudy or rainy days?
Short answer: Yes, at a reduced level, around 60 per cent on a dull day.
Detailed: Illume works relative to the light outside. On a sunny day it runs at full brightness; on an overcast or rainy day its output drops to around 60 per cent. Because the rest of the house is darker too, the Illume room still reads as the bright one.
Do Illume skylights get hot?
Short answer: No. The LEDs are low-powered and generate no heat.
Detailed: A glass skylight can turn a room into a hot box in summer. An Illume's LED diffuser makes no heat of its own and conducts none in from the roof, which makes it safe for bathrooms, kitchens and humid rooms. It is a sealed unit, so there are no bugs, no dust and no condensation.
What warranty does an Illume come with?
Short answer: A five-year Kimberley manufacturer's warranty, plus our workmanship warranty as a QBCC-licensed contractor.
Detailed: Kimberley Products backs every Illume with a five-year warranty, and Sol Coast Construction warrants the installation. In the rare event of a fault we deal with it directly, and Kimberley replaces a faulty product promptly. You are covered for the product and for the work.
How much does an Illume skylight cost on the Sunshine Coast?
Short answer: It depends on the size, shape and number of panels. We give a fixed written quote after a site visit.
Detailed: Illume panels are priced by size, from the small rounds up to the 400 × 1200 mm rectangle, and there are discounts when several panels are installed together. Rather than publish a figure that will not match your rooms, we measure and quote. Ask for a quote and you will have the exact cost for your home.
How long does an Illume installation take?
Short answer: Most homes are installed within two to six weeks of accepting the quote.
Detailed: Once you accept your quote, the kit is generally ready within ten business days, and we book a date that suits you. Most Sunshine Coast customers have their Illumes in within two to six weeks, and we keep you posted at every step.
Illume-only, by choice
Sol Coast Construction installs Illume and nothing else. We are not a roofing company that also fits skylights, nor a lighting shop with a skylight in the catalogue. We chose one product because, for the Sunshine Coast homes we work in, it is the right one: no roof cutting, no heat, no maintenance, and rooms a roof window cannot reach. That focus is why we are an accredited Illume dealer installer, and why a quote from us arrives with the panel size, the position and the solar panel placement already worked out.

Contact us and take the first step towards daylight-style light for your home, with proudly Australian made and owned Illume skylight alternatives.

